Liitännät

The relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel. The unit can be controlled by serial channel RS-485 and by potential free contact inputs. These contact inputs are intended to be used mainly as “wall switches” for direct control of dedicated relay circuits. To fulfil various tasks, the input operation can be assigned to different functions by setting their functional parameters in the project configuration. The programmable parameters are response on the input, delayed on / off, pulse, and drapes and motor control sequence. Basic parameters can be set using buttons on front panel, other parameters are set by serial channel. Front panel includes LED indicators for power supply, serial channel activity and status of all power relays. The unit can be combined with all Power Express units. The enclosure allows simple installation on a DIN rail.

the PEA208 is a two-channel analog output interface. Each independent 0 - 10 V analog output enables control of VCA, light dimmer, hydraulic or pneumatic valve type devices. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. If the analog output value is greater then 1 V then the relay turns on automatically. The front panel includes LED indicator for each output. The enclosure allows simple installation on a DIN rail.

The PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.

The PET105 is a one-channel dimmer for resistive and capacitive loads up to 5 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.