Ohjausjärjestelmät

RS-485 serial cable between controller and power switching units, dimmers and interfaces.

RS-485 serial cable between controller / interface and power switching units, dimmers and interfaces.

Adapter for conversion from non-CUE ready PANCONNECT boxes This adapter allows to install interface into PANCONNECT boxes that are not prepared for CUE products.

Wall set for installation of "55" units on the wall This set allows to install interface on the wall. It is fully compatible with standard electrical wall boxes.

Any status indicator on the controlled device can be read using the Opto-Input Adapter /i photosensitive cell. The Opto-Input Adapter /i is fastened on the indicator using a double-sided adhesive tape.

Holder for installation of "55" units on the top of the desk Allows to install interface on the top of the table. It attaches on the top side of the table desk

Holder for installation of "55" units under the desk This holder allows to install interface under the table. It attaches to the under side of the table desk.

NFC module for touchONE-7-M & touchONE-10-M

The Rack Mounting Shelf is an optional mounting accessory for controllers and IP interfaces. It allows secure installation of the devices in a 19” EIA equipment rack. The Rack Mounting Shelf occupies 1 rack space and it allows to install one full rack width unit, two half rack width units, four quarter rack width units or any possible combinations. The delivered faceplates can hide any open position on the shelf. Rackmounting hardware is not supplied.

The PES03 is a three-channel suppressor unit for switching channels. The enclosure allows simple installation on a DIN rail.

The IR Adapter Set is set of five infrared emitters. Every infrared emitter cable can be used for controlling AV devices equipped with IR control capabilities. LED emmiter is fastened on the receiver window using a double-sided adhesive tape.

Wired 8-button panel 55 x 55 mm, signal white RAL9003

Wired 8-button panel 55 x 55 mm, white aluminium RAL9006 (=grey)

Desk reservation interface

The appCUE application enables to use any Apple iOS device (iPad®, iPhone® or iPod® touch), Android tablet or phone and any Windows PC or tablet as a Cue System control panel. It is a suitable addition to CUE’s touch panels and other control panels.

The relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel. The unit can be controlled by serial channel RS-485 and by potential free contact inputs. These contact inputs are intended to be used mainly as “wall switches” for direct control of dedicated relay circuits. To fulfil various tasks, the input operation can be assigned to different functions by setting their functional parameters in the project configuration. The programmable parameters are response on the input, delayed on / off, pulse, and drapes and motor control sequence. Basic parameters can be set using buttons on front panel, other parameters are set by serial channel. Front panel includes LED indicators for power supply, serial channel activity and status of all power relays. The unit can be combined with all Power Express units. The enclosure allows simple installation on a DIN rail.

the PEA208 is a two-channel analog output interface. Each independent 0 - 10 V analog output enables control of VCA, light dimmer, hydraulic or pneumatic valve type devices. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. If the analog output value is greater then 1 V then the relay turns on automatically. The front panel includes LED indicator for each output. The enclosure allows simple installation on a DIN rail.

The PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.

The PET105 is a one-channel dimmer for resistive and capacitive loads up to 5 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.

4.3" touch-screen keypad with user-defined button labels and indicators

The controlCUE-hub is fully functional IP controller with internal IR blaster and EnOcean wireless communication. It is compatible with IP accessible devices and connects wirelessly with many of EnOcean compatible devices, allowing to monitor, control and secure your site from anywhere. It is the perfect heart for DIY products integration incl. retrofit installations. The hub communicates with all different connected products regardless of their communication protocol. Fully compatible with CUE touch panels, this controller can work as standalone device. Single cable Ethernet connection provides easy network integration. The controller installs easily on a table or on a wall. This controller comes with a web server and allows setup through a standard web browser. Programming is provided by CUE’s standard programming tool Cue Visual Composer.

Cost-effective IP enabled tabletop controller

Lightweight controller equipped with serial ports RS232/485, versatile ports and low-voltage relays.

Lightweight controller equipped with serial ports RS232/485 and versatile ports.

DIN rail compatible lightweight controller equipped with serial ports RS232/485 and versatile ports.

Cost-effective control system with keypad for small applications

Room overview unit with HDMI output

Ethernet IP enabled high-end controller equipped with variety types of control ports.

IP enabled ultra-compact tabletop controller

Ethernet IP enabled high-end controller equipped with variety types of control ports.

IP enabled wired built-in touch panel 4.3"

Ethernet IP enabled high-end controller equipped with variety types of control ports.

Ethernet IP enabled high-end controller equipped with variety types of control ports. It is at least ten times more powerful compare to ipCUE controllers lineup. The controlCUE-one is recommended for medium to large scale applications. Enclosure allows installation to 19” rack using Rack Mounting kit.

4.3" touch-screen workplace reservation interface

Desk interface concentrator

Ethernet IP enabled high-end controller equipped with variety types of control ports.

Cost-effective control system with touch-screen keypad for small and medium applications

Ethernet IP enabled high-end controller equipped with variety types of control ports.

Interactive reservation on-wall panel 7"

On-premises administration & analytics, plug & play unit

Ethernet IP enabled high-end controller equipped with variety types of control ports. It is at least ten times more powerful compare to ipCUE controllers lineup. The controlCUE-two is recommended for medium to large scale applications. Enclosure allows installation to 19” rack using Rack Mounting kit.

Interactive reservation on-wall panel 10"

SWR2311P-10G on älykäs L2-kytkin, joka voi syöttää virtaa verkon PoE-käyttöisille laitteille.

Graphic player and interface for HID compliant touch screens

IP enabled wired built-in touch panel 7"

IP enabled wired on-wall touch panel 7"

IP enabled wired tabletop touch panel 7"

IP enabled wired built-in touch panel 10"

IP enabled wired on-wall touch panel 10"

Interactive reservation on-wall panel 12.1"

IP enabled wired tabletop touch panel 10"

IP enabled wired built-in touch panel 12.1"

IP enabled wired tabletop touch panel 12.1"