Ole hyvä ja odota...
Tuote on lisätty ostoskoriin. Näytä ostoskorin sisältö
Just Something Special
Ostoskorisi on tyhjä

CUE System / Luettelo

Etusivu CUE System

CUE System on kehittänyt ohjelmointiympäristön ”CUE Visual Composer” jolla ohjelmointi ja testaus on helppoa. Yhdellä ja samalla ohjelmointiympäristöllä voidaan luoda käyttöliittymät CUE touchCUE kosketusnäytöille, tietokoneille (Win10) ja sormitietokoneille (Android ja iOS). Samalla työkalulla luodaan myös ohjelmat tilatekniikan ohjaukseen. Myös testaaminen onnistuu pääsääntöisesti ilman mitään lisälaitteita suoraan ohjelmointitietokoneelta. CUE System valmistaa myös touchONE tilanvarausjärjestelmää neuvotteluhuoneiden varaamista varten.

Näytetään 1 - 60 / 75 tuotteesta
CUE System Serial Cable 3-pin to RJ-14
Tuotekoodi: CA0184
RS-485 serial cable between controller and power switching units, dimmers and interfaces.
Kysy saatavuus myynnistä
CUE System Serial Cable 5-pin to RJ-14
Tuotekoodi: CA0183
RS-485 serial cable between controller / interface and power switching units, dimmers and interfaces.
Kysy saatavuus myynnistä
CUE System Pan Adapter 55
Tuotekoodi: CS0584
Adapter for conversion from non-CUE ready PANCONNECT boxes This adapter allows to install interface into PANCONNECT boxes that are not prepared for CUE products.
Kysy saatavuus myynnistä
CUE System Wall Set 55
Tuotekoodi: CS0583
Wall set for installation of "55" units on the wall This set allows to install interface on the wall. It is fully compatible with standard electrical wall boxes.
Kysy saatavuus myynnistä
CUE System Opto-Input Adapter /i
Tuotekoodi: CS0257
Any status indicator on the controlled device can be read using the Opto-Input Adapter /i photosensitive cell. The Opto-Input Adapter /i is fastened on the indicator using a double-sided adhesive tape.
Kysy saatavuus myynnistä
CUE System Tabletop Holder 55
Tuotekoodi: CS0586
Holder for installation of "55" units on the top of the desk Allows to install interface on the top of the table. It attaches on the top side of the table desk
Kysy saatavuus myynnistä
CUE System Under Desk Holder 55
Tuotekoodi: CS0587
Holder for installation of "55" units under the desk This holder allows to install interface under the table. It attaches to the under side of the table desk.
Kysy saatavuus myynnistä
CUE System CUEadapter-24P24, Wall-mount adapter with exchangeable AC plugs
Tuotekoodi: CS0437
The CUEadapter-24P24 is an AC/DC switching mode power supply that provides 24 VDC / 24 W of continuous output power. The unit is 100% burned in and tested.
Kysy saatavuus myynnistä
CUE System CUEadapter-24DIN15, DIN rail switching power supply 24 VDC / 15 W
Tuotekoodi: CS0474
The switching power supply CUEadapter-24DIN15 is specifically designed to satisfy both the Automation and the Building automation application requirements. The two DIN modules’ power supply is capable of up to 15 W output power. Its high efficiency prevents excess heat in the installation place. Ventilation and cooling are provided by normal air convection and free space along all sides to allow good cooling. Easy snap-on mounting onto the DIN rail, the unit sits safely and firmly on the rail. No tools are required even to remove.
Kysy saatavuus myynnistä
CUE System PoE Adapter, Power over Ethernet injector
Tuotekoodi: CS0327
The PoE Adapter is fully compliant with the IEEE802.3af standard. It delivers up to 15.4 W output power per port. By using this device, both data and electrical power can be simultaneously delivered through a single CAT5 (or better) Ethernet cable to a non-PoE Ethernet-enabled device, eliminating the trouble to connect it to an outlet nearby with an external power cord. You can connect it to a wireless AP, Webcam (IP Camera), IP telephone, or other IEEE802.3af compliant devices to reduce installation costs and improve your network performance.
Kysy saatavuus myynnistä
CUE System NFC Reader, xtension NFC reader for 7" & 10" panels in "M" version (HW revision 22 and higher)
Tuotekoodi: CS0618
The NFC Module is an expansion accessory for touchONE and touchCUE panels. It enables the use of NFC technology in the touchONE reservation system as well as in the CUE control system. This module is not compatible with built-in touch panels. To set up NFC functions in the touchONE reservation system, it is necessary to use the touchONE-admin management system. Ask for software availability. Functions for using NFC in the control system are available as part of the Cue Visual Composer programming tool.
Kysy saatavuus myynnistä
CUE System touchONE-assist Room, Room annual license for shared resources planning & reservation tool (annual commitment, all upgrades included) - 1 year
Tuotekoodi: CS0600-annual
The touchONE-7-M is a wired on-wall reservation panel offering a clean modern design with edge-to-edge front glass and a sleek aluminum body. It is an ideal reservation panel for any meeting place such as a meeting room, boardroom, training room, auditorium, etc.
Kysy saatavuus myynnistä
CUE System IR Adapter Set
Tuotekoodi: CS0553
The IR Adapter Set is set of five infrared emitters. Every infrared emitter cable can be used for controlling AV devices equipped with IR control capabilities. LED emmiter is fastened on the receiver window using a double-sided adhesive tape.
Kysy saatavuus myynnistä
CUE System Rack Mounting Shelf
Tuotekoodi: CS0449
The Rack Mounting Shelf is an optional mounting accessory for controllers and IP interfaces. It allows secure installation of the devices in a 19” EIA equipment rack. The Rack Mounting Shelf occupies 1 rack space and it allows to install one full rack width unit, two half rack width units, four quarter rack width units or any possible combinations. The delivered faceplates can hide any open position on the shelf. Rackmounting hardware is not supplied.
Kysy saatavuus myynnistä
CUE System webCUE, Simple & safe room control & meeting management
Tuotekoodi: CS0605
Simple & safe room control & meeting management using BYOD
Kysy saatavuus myynnistä
CUE System Software - Cloud Services
Tuotekoodi: CS0622-100-annual
Kysy saatavuus myynnistä
CUE System keypadCUE-55, Wired 8-button keypad 55 x 55 mm, signal white RAL9003
Tuotekoodi: CS0542-9003
The keypadCUE-55 is a fully customizable button control panel compatible with all CUE controllers. This easy-to-use control interface connects to controllers to offer a wide variety of functions such as display on and off, input switching, volume, mute control, etc.
Kysy saatavuus myynnistä
CUE System keypadCUE-55-grey
Tuotekoodi: CS0542-9006
Wired 8-button panel 55 x 55 mm, white aluminium RAL9006 (=grey)
Kysy saatavuus myynnistä
CUE System DALIpwr, DIN rail compatible DALI power supply
Tuotekoodi: CS0459
The DALI port of controlCUE-dali-d does not provide a DALI power supply. This power supply must be ensured by an external DALI power source. DALIpwr is a special power supply for the DALI bus. Output current for supplying units can be up to 240 mA. The presence of current, ongoing communication on the DALI bus and short-circuit or overload are indicated on the front panel. DALI units are equipped with a diode bridge so that devices can be wired regardless of the cable polarity.
Kysy saatavuus myynnistä
Kysy saatavuus myynnistä
CUE System appCUE
Tuotekoodi: CS0485
The appCUE application enables to use any Apple iOS device (iPad®, iPhone® or iPod® touch), Android tablet or phone and any Windows PC or tablet as a Cue System control panel. It is a suitable addition to CUE’s touch panels and other control panels.
Kysy saatavuus myynnistä
CUE System relayCUE-8
Tuotekoodi: CS0335-2
The relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel. The unit can be controlled by serial channel RS-485 and by potential free contact inputs. These contact inputs are intended to be used mainly as “wall switches” for direct control of dedicated relay circuits. To fulfil various tasks, the input operation can be assigned to different functions by setting their functional parameters in the project configuration. The programmable parameters are response on the input, delayed on / off, pulse, and drapes and motor control sequence. Basic parameters can be set using buttons on front panel, other parameters are set by serial channel. Front panel includes LED indicators for power supply, serial channel activity and status of all power relays. The unit can be combined with all Power Express units. The enclosure allows simple installation on a DIN rail.
Kysy saatavuus myynnistä
CUE System relayCUE-8, Eight power relays controlled by serial channel, version 110 VAC
Tuotekoodi: CS0335-1
The relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel. it is suitable for control of lights (incl. time-switch), drapes, projection screens, AC and DC motors, etc. The unit can be controlled by serial channel RS-485 and by potential free contact inputs. These contact inputs are intended to be used mainly as “wall switches” for direct control of dedicated relay circuits. To fulfill various tasks, the input operation can be assigned to different functions by setting their functional parameters in the project configuration.
Kysy saatavuus myynnistä
CUE System PEA208
Tuotekoodi: CS0225-2
the PEA208 is a two-channel analog output interface. Each independent 0 - 10 V analog output enables control of VCA, light dimmer, hydraulic or pneumatic valve type devices. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. If the analog output value is greater then 1 V then the relay turns on automatically. The front panel includes LED indicator for each output. The enclosure allows simple installation on a DIN rail.
Kysy saatavuus myynnistä
CUE System PEA208, Two analog outputs 0 - 10 V, version 110 VAC
Tuotekoodi: CS0225-1
The PEA208 is a two-channel analog output interface. Each independent 0 - 10 V analog output enables control of VCA, light dimmer, hydraulic, or pneumatic valve type devices. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed, and output characteristic. If the analog output value is greater than 1 V, the relay turns on automatically. The front panel includes an LED indicator for each output. The enclosure allows simple installation on a DIN rail.
Kysy saatavuus myynnistä
CUE System PET102
Tuotekoodi: CS0244-2
The PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.
Kysy saatavuus myynnistä
CUE System PET102, One-channel dimmer for resistive and capacitive loads, version 110 VAC
Tuotekoodi: CS0244-1
The PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed, and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload, and over-current fuse. The enclosure allows simple installation on a DIN rail.
Kysy saatavuus myynnistä
CUE System PET105
Tuotekoodi: CS0245-2
The PET105 is a one-channel dimmer for resistive and capacitive loads up to 5 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.
Kysy saatavuus myynnistä
CUE System PET105, One-channel dimmer for resistive and capacitive loads, version 110 VAC
Tuotekoodi: CS0245-1
The PET105 is a one-channel dimmer for resistive and capacitive loads up to 5 A suitable for dimming electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed, and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload, and over-current fuse. The enclosure allows simple installation on a DIN rail.
Kysy saatavuus myynnistä
CUE System tapCUE-4
Tuotekoodi: CS0589
The tapCUE-4 is a wired network touch-screen keypad for tabletop or on-wall installation. It offers a modern design with a 4.3” color LCD display and a slim plastic enclosure. It is a convenient and affordable control panel for any meeting room.
Kysy saatavuus myynnistä
CUE System controlCUE-hub
Tuotekoodi: CS0487
The controlCUE-hub is fully functional IP controller with internal IR blaster and EnOcean wireless communication. It is compatible with IP accessible devices and connects wirelessly with many of EnOcean compatible devices, allowing to monitor, control and secure your site from anywhere. It is the perfect heart for DIY products integration incl. retrofit installations. The hub communicates with all different connected products regardless of their communication protocol. Fully compatible with CUE touch panels, this controller can work as standalone device. Single cable Ethernet connection provides easy network integration. The controller installs easily on a table or on a wall. This controller comes with a web server and allows setup through a standard web browser. Programming is provided by CUE’s standard programming tool Cue Visual Composer.
Kysy saatavuus myynnistä
CUE System controlCUE-basic
Tuotekoodi: CS0552
Cost-effective IP enabled tabletop controller
Kysy saatavuus myynnistä
CUE System smartCUE-relay
Tuotekoodi: CS0496
Lightweight controller equipped with serial ports RS232/485, versatile ports and low-voltage relays.
Kysy saatavuus myynnistä
CUE System smartCUE-versatile
Tuotekoodi: CS0491
Lightweight controller equipped with serial ports RS232/485 and versatile ports.
Kysy saatavuus myynnistä
CUE System smartCUE-versatile-d
Tuotekoodi: CS0492
DIN rail compatible lightweight controller equipped with serial ports RS232/485 and versatile ports.
Kysy saatavuus myynnistä
Kysy saatavuus myynnistä
Kysy saatavuus myynnistä
CUE System liteCUE-web, Cost-effective control system with web application license
Tuotekoodi: CS0608
Cost-effective control system with web application license
Kysy saatavuus myynnistä
CUE System controlCUE-enocean-d
Tuotekoodi: CS0458
Ethernet IP enabled high-end controller equipped with variety types of control ports.
Kysy saatavuus myynnistä
CUE System controlCUE-versatile
Tuotekoodi: CS0475
IP enabled ultra-compact tabletop controller
Kysy saatavuus myynnistä
CUE System controlCUE-versatile-d
Tuotekoodi: CS0453
Ethernet IP enabled high-end controller equipped with variety types of control ports.
Kysy saatavuus myynnistä
CUE System controlCUE-dmx-d
Tuotekoodi: CS0456
Ethernet IP enabled high-end controller equipped with variety types of control ports.
Kysy saatavuus myynnistä
CUE System controlCUE-dali-d
Tuotekoodi: CS0454
Ethernet IP enabled high-end controller equipped with variety types of control ports.
Kysy saatavuus myynnistä
CUE System liteCUE-tap
Tuotekoodi: CS0593
Cost-effective control system with touch-screen keypad for small and medium applications
Kysy saatavuus myynnistä
CUE System controlCUE-three, High-end Ethernet IP-enabled controller
Tuotekoodi: CS0595
The controlCUE-three is a high-end Ethernet IP-enabled controller with various control ports. It is recommended for medium to large-scale commercial, government, and residential applications. Control ports include RS-232/485 bi-directional serial channels, universal ports, and low-voltage relays. The Ethernet port allows bi-directional IP control of any manufacturer's IP-enabled products.
Kysy saatavuus myynnistä
CUE System controlCUE-knx-d
Tuotekoodi: CS0455
Ethernet IP enabled high-end controller equipped with variety types of control ports.
Kysy saatavuus myynnistä
CUE System touchONE-overview
Tuotekoodi: CS0510
Room overview unit with HDMI output
Kysy saatavuus myynnistä
CUE System touchONE-concentrator
Tuotekoodi: CS0571
Desk interface concentrator
Kysy saatavuus myynnistä
CUE System signCUE-two, Graphic player and interface for HID compliant touch screens
Tuotekoodi: CS0592
The signCUE-two is a powerful IP-enabled unit that serves as a controller, server, touch monitor interface, and display device interface. It runs standard projects created in Cue Visual Composer and allows to combine custom graphical environment with controls for AV, lighting, drapes, HVAC, and other technologies. The signCUE-two provides an HDMI 2.0 output for connection to the display device and includes a USB HID port for touch screen connection. The Ethernet provides a connection to other Cue System units as well as a control port for IP-controlled devices. The player is enclosed in a compact chassis and can be easily installed behind a flat display or projector, under a table, or inside a rack.
Kysy saatavuus myynnistä
Näytetään 1 - 60 / 75 tuotteesta