Reservation System

CUE System Serial Cable 5-pin to RJ-14

SKU: CA0183

RS-485 serial cable between controller / interface and power switching units, dimmers and interfaces.

Out of stock

Notify when in stock

CUE System Serial Cable 3-pin to RJ-14

SKU: CA0184

RS-485 serial cable between controller and power switching units, dimmers and interfaces.

Out of stock

Notify when in stock

CUE System touchONE-assist Workplace, Workplace annual license for shared resources planning & reservation tool (annual commitment, all upgrades included) - 1 year

SKU: CS0601-annual

Out of stock

Notify when in stock

CUE System touchONE-assist POI, POI annual license for shared resources planning & reservation tool (annual commitment, all upgrades included) - 1 year

SKU: CS0621-annual

Out of stock

Notify when in stock

CUE System touchONE-assist Custom, Custom annual license for shared resources planning & reservation tool (annual commitment, all upgrades included) - 1 year

SKU: CS0606-annual

Out of stock

Notify when in stock

CUE System Wall Set 55

SKU: CS0583

Wall set for installation of "55" units on the wall This set allows to install interface on the wall. It is fully compatible with standard electrical wall boxes.

Out of stock

Notify when in stock

CUE System Pan Adapter 55

SKU: CS0584

Adapter for conversion from non-CUE ready PANCONNECT boxes This adapter allows to install interface into PANCONNECT boxes that are not prepared for CUE products.

Out of stock

Notify when in stock

CUE System Opto-Input Adapter /i

SKU: CS0257

Any status indicator on the controlled device can be read using the Opto-Input Adapter /i photosensitive cell. The Opto-Input Adapter /i is fastened on the indicator using a double-sided adhesive tape.

Out of stock

Notify when in stock

CUE System Tabletop Holder 55

SKU: CS0586

Holder for installation of "55" units on the top of the desk Allows to install interface on the top of the table. It attaches on the top side of the table desk

Out of stock

Notify when in stock

CUE System Under Desk Holder 55

SKU: CS0587

Holder for installation of "55" units under the desk This holder allows to install interface under the table. It attaches to the under side of the table desk.

Out of stock

Notify when in stock

CUE System CUEadapter-24P24, Wall-mount adapter with exchangeable AC plugs

SKU: CS0437

The CUEadapter-24P24 is an AC/DC switching mode power supply that provides 24 VDC / 24 W of continuous output power. The unit is 100% burned in and tested.

Out of stock

Notify when in stock

CUE System CUEadapter-24DIN15, DIN rail switching power supply 24 VDC / 15 W

SKU: CS0474

The switching power supply CUEadapter-24DIN15 is specifically designed to satisfy both the Automation and the Building automation application requirements. The two DIN modules’ power supply is capable of up to 15 W output power. Its high efficiency prevents excess heat in the installation place. Ventilation and cooling are provided by normal air convection and free space along all sides to allow good cooling. Easy snap-on mounting onto the DIN rail, the unit sits safely and firmly on the rail. No tools are required even to remove.

Out of stock

Notify when in stock

CUE System PoE Adapter, Power over Ethernet injector

SKU: CS0327

The PoE Adapter is fully compliant with the IEEE802.3af standard. It delivers up to 15.4 W output power per port. By using this device, both data and electrical power can be simultaneously delivered through a single CAT5 (or better) Ethernet cable to a non-PoE Ethernet-enabled device, eliminating the trouble to connect it to an outlet nearby with an external power cord. You can connect it to a wireless AP, Webcam (IP Camera), IP telephone, or other IEEE802.3af compliant devices to reduce installation costs and improve your network performance.

Out of stock

Notify when in stock

CUE System NFC Reader, xtension NFC reader for 7" & 10" panels in "M" version (HW revision 22 and higher)

SKU: CS0618

The NFC Module is an expansion accessory for touchONE and touchCUE panels. It enables the use of NFC technology in the touchONE reservation system as well as in the CUE control system. This module is not compatible with built-in touch panels. To set up NFC functions in the touchONE reservation system, it is necessary to use the touchONE-admin management system. Ask for software availability. Functions for using NFC in the control system are available as part of the Cue Visual Composer programming tool.

Out of stock

Notify when in stock

CUE System touchONE-assist Room, Room annual license for shared resources planning & reservation tool (annual commitment, all upgrades included) - 1 year

SKU: CS0600-annual

The touchONE-7-M is a wired on-wall reservation panel offering a clean modern design with edge-to-edge front glass and a sleek aluminum body. It is an ideal reservation panel for any meeting place such as a meeting room, boardroom, training room, auditorium, etc.

Out of stock

Notify when in stock

CUE System touchONE-assist Workplace, Workplace perpetual license for shared resources planning & reservation tool (all upgrades included)

SKU: CS0601-perpetual

Out of stock

Notify when in stock

CUE System touchONE-assist Custom, stom perpetual license for shared resources planning & reservation tool (all upgrades included)

SKU: CS0606-perpetual

Out of stock

Notify when in stock

CUE System touchONE-assist POI, POI perpetual license for shared resources planning & reservation tool (all upgrades included

SKU: CS0621-perpetual

Out of stock

Notify when in stock

CUE System IR Adapter Set

SKU: CS0553

The IR Adapter Set is set of five infrared emitters. Every infrared emitter cable can be used for controlling AV devices equipped with IR control capabilities. LED emmiter is fastened on the receiver window using a double-sided adhesive tape.

Out of stock

Notify when in stock

CUE System Rack Mounting Shelf

SKU: CS0449

The Rack Mounting Shelf is an optional mounting accessory for controllers and IP interfaces. It allows secure installation of the devices in a 19” EIA equipment rack. The Rack Mounting Shelf occupies 1 rack space and it allows to install one full rack width unit, two half rack width units, four quarter rack width units or any possible combinations. The delivered faceplates can hide any open position on the shelf. Rackmounting hardware is not supplied.

Out of stock

Notify when in stock

CUE System webCUE, Simple & safe room control & meeting management

SKU: CS0605

Simple & safe room control & meeting management using BYOD

Out of stock

Notify when in stock

CUE System Terabee People Counting M White

SKU: TB-PCM-W

Out of stock

Notify when in stock

CUE System Software - Cloud Services

SKU: CS0622-100-annual

Out of stock

Notify when in stock

CUE System keypadCUE-55, Wired 8-button keypad 55 x 55 mm, signal white RAL9003

SKU: CS0542-9003

The keypadCUE-55 is a fully customizable button control panel compatible with all CUE controllers. This easy-to-use control interface connects to controllers to offer a wide variety of functions such as display on and off, input switching, volume, mute control, etc.

Out of stock

Notify when in stock

CUE System keypadCUE-55-grey

SKU: CS0542-9006

Wired 8-button panel 55 x 55 mm, white aluminium RAL9006 (=grey)

Out of stock

Notify when in stock

CUE System DALIpwr, DIN rail compatible DALI power supply

SKU: CS0459

The DALI port of controlCUE-dali-d does not provide a DALI power supply. This power supply must be ensured by an external DALI power source. DALIpwr is a special power supply for the DALI bus. Output current for supplying units can be up to 240 mA. The presence of current, ongoing communication on the DALI bus and short-circuit or overload are indicated on the front panel. DALI units are equipped with a diode bridge so that devices can be wired regardless of the cable polarity.

Out of stock

Notify when in stock

CUE System touchONE-SaaS, Cloud service annual fee - up to 300 resources/accounts

SKU: CS0622-300-annual

Out of stock

Notify when in stock

CUE System touchONE-admin, Powerful and flexible administration tool annual license (annual commitment, all upgrades included) - 1 year

SKU: CS0604-annual

Out of stock

Notify when in stock

infobit 10 Keys Control Keypad, 1 Gang UK version.

SKU: iControl K10-UK

10 button programmable control keypad with PoE

Out of stock

Notify when in stock

infobit 10 Keys Control Keypad, 1 Gang US version.

SKU: iControl K10-US

10 button programmable control keypad with PoE

Out of stock

Notify when in stock

CUE System touchONE-SaaS, Cloud service annual fee - up to 500 resources/accounts

SKU: CS0622-500-annual

Out of stock

Notify when in stock

CUE System Terabee People Counting L-XL White

SKU: TB-PCL-XL-W

Out of stock

Notify when in stock

CUE System appCUE

SKU: CS0485

The appCUE application enables to use any Apple iOS device (iPad®, iPhone® or iPod® touch), Android tablet or phone and any Windows PC or tablet as a Cue System control panel. It is a suitable addition to CUE’s touch panels and other control panels.

Out of stock

Notify when in stock

CUE System relayCUE-8

SKU: CS0335-2

The relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel. The unit can be controlled by serial channel RS-485 and by potential free contact inputs. These contact inputs are intended to be used mainly as “wall switches” for direct control of dedicated relay circuits. To fulfil various tasks, the input operation can be assigned to different functions by setting their functional parameters in the project configuration. The programmable parameters are response on the input, delayed on / off, pulse, and drapes and motor control sequence. Basic parameters can be set using buttons on front panel, other parameters are set by serial channel. Front panel includes LED indicators for power supply, serial channel activity and status of all power relays. The unit can be combined with all Power Express units. The enclosure allows simple installation on a DIN rail.

Out of stock

Notify when in stock

CUE System relayCUE-8, Eight power relays controlled by serial channel, version 110 VAC

SKU: CS0335-1

The relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel. it is suitable for control of lights (incl. time-switch), drapes, projection screens, AC and DC motors, etc. The unit can be controlled by serial channel RS-485 and by potential free contact inputs. These contact inputs are intended to be used mainly as “wall switches” for direct control of dedicated relay circuits. To fulfill various tasks, the input operation can be assigned to different functions by setting their functional parameters in the project configuration.

Out of stock

Notify when in stock

CUE System PEA208

SKU: CS0225-2

the PEA208 is a two-channel analog output interface. Each independent 0 - 10 V analog output enables control of VCA, light dimmer, hydraulic or pneumatic valve type devices. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. If the analog output value is greater then 1 V then the relay turns on automatically. The front panel includes LED indicator for each output. The enclosure allows simple installation on a DIN rail.

Out of stock

Notify when in stock

CUE System PEA208, Two analog outputs 0 - 10 V, version 110 VAC

SKU: CS0225-1

The PEA208 is a two-channel analog output interface. Each independent 0 - 10 V analog output enables control of VCA, light dimmer, hydraulic, or pneumatic valve type devices. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed, and output characteristic. If the analog output value is greater than 1 V, the relay turns on automatically. The front panel includes an LED indicator for each output. The enclosure allows simple installation on a DIN rail.

Out of stock

Notify when in stock

infobit 10 Keys Control Keypad, Table Box version.

SKU: iControl K10-TB

10 button programmable control keypad with PoE

Out of stock

Notify when in stock

CUE System PET105, One-channel dimmer for resistive and capacitive loads, version 110 VAC

SKU: CS0245-1

The PET105 is a one-channel dimmer for resistive and capacitive loads up to 5 A suitable for dimming electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed, and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload, and over-current fuse. The enclosure allows simple installation on a DIN rail.

Out of stock

Notify when in stock

CUE System PET102, One-channel dimmer for resistive and capacitive loads, version 110 VAC

SKU: CS0244-1

The PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed, and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload, and over-current fuse. The enclosure allows simple installation on a DIN rail.

Out of stock

Notify when in stock

CUE System PET102

SKU: CS0244-2

The PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.

Out of stock

Notify when in stock

CUE System PET105

SKU: CS0245-2

The PET105 is a one-channel dimmer for resistive and capacitive loads up to 5 A suitable for dimming of electronic transformers. The unit can be controlled by PEbus and by potential free contact inputs. The programmable parameters are input response, minimum and maximum output voltage, dimming speed and output characteristic. The front panel includes LED indicators for output level, maximum temperature overload and over-current fuse. The enclosure allows simple installation on a DIN rail.

Out of stock

Notify when in stock

infobit 4K30 HDMI Video Wall Controller, 1x HDMI input, 9x HDMI outputs. Cascading supports.

SKU: iWall 109

1x9 4K30 Video Wall Controller

Out of stock

Notify when in stock

CUE System tapCUE-4

SKU: CS0589

The tapCUE-4 is a wired network touch-screen keypad for tabletop or on-wall installation. It offers a modern design with a 4.3” color LCD display and a slim plastic enclosure. It is a convenient and affordable control panel for any meeting room.

Out of stock

Notify when in stock

CUE System controlCUE-hub

SKU: CS0487

The controlCUE-hub is fully functional IP controller with internal IR blaster and EnOcean wireless communication. It is compatible with IP accessible devices and connects wirelessly with many of EnOcean compatible devices, allowing to monitor, control and secure your site from anywhere. It is the perfect heart for DIY products integration incl. retrofit installations. The hub communicates with all different connected products regardless of their communication protocol. Fully compatible with CUE touch panels, this controller can work as standalone device. Single cable Ethernet connection provides easy network integration. The controller installs easily on a table or on a wall. This controller comes with a web server and allows setup through a standard web browser. Programming is provided by CUE’s standard programming tool Cue Visual Composer.