Please wait...
The product was added to the shopping cart. View shopping cart
Just Something Special
Cart is empty

Other products

Showing 1-60 of 60 items
Interspace Industries PC Bal Box - Passive balancing & hum eliminator Jack I/P
SKU: PCBBJ2
The PCBB3 eliminates hum problems when connecting audio from your presentation PC. It is completely passive and bi-directional.
YAMAHA Rack mount accessory for SWR2100P series and SWR2311P-10G.
SKU: RK-SWR
Rack mount accessory for SWR series switces
Interspace Industries Analogue Terminating Bal Box - - Balanced in /Unbalanced out.
SKU: ATBB
ATBB Analogue termination to unBal Box. This is the PCBB in reverse – Balance line-in to unbalanced out on a 3.5mm jack. This is for use on systems that have a mini-jack input for stereo line or stereo mic input. The Ground will isolate the ground from the source for rejection of the ground loop hum. The Pad will pad the signal to about 36dB. The Stereo/Mono switch will join the output pairs via a resistive element to give both channels the same signal.
AVPro Edge Audio Extender Transmitter Only
SKU: AC-AEX-T
The AC-AEX-T professional audio Transmitter from AVPro Edge allows integrators to deliver uncompressed audio signals 100 meters away from the source.
AVPro Edge Audio Extender Reciever Only
SKU: AC-AEX-R
The AC-AEX-R professional audio Receiver from AVPro Edge allows integrators to deliver uncompressed audio signals 100 meters away from the source.
infobit Audio Extenders (Tx and Rx) over CAT cable, 300m
SKU: iTrans EA300
Audio Extender over network, 300m
YAMAHA Digital Control Panel for MTX Series. 4 Switches.
SKU: DCP4SEU
4 Switch equipped Wall Mount Control panel for MTX/MRX Series and MA/PA series. Easy connection by CAT5 carrying RS485 + power.
YAMAHA Wall mount accessory for SWR2311P-10G.
SKU: WK-SWR
Wall mount accessory for SWR series switches
YAMAHA Digital Control Panel for MTX Series. 1 Volume & 4 Switches.
SKU: DCP1V4SEU
1 Volume & 4 Switch equipped Wall Mount Control panel for DME7, MTX/MRX Series and MA/PA series.
Interspace Industries AiOx, In/Out USB Audio with level controls, Mic/Line input
SKU: AiOx
The AiOx (Audio in Out eXtended), is a versatile Audio in/Out soundcard on USB.
AVPro Edge 130m Stereo/Digital Audio Extender over CAT5e built in DAC (Toslink/LR)
SKU: AC-AEX-KIT
The AC-AEX-KIT is a professional audio extender from AVPro Edge, allowing integrators to deliver uncompressed, stereo signals over 100 Meters from the source.
Interspace Industries Comms interface with ¼” jack I/P level control & 12VDC PSU with stereo summing input lead
SKU: CiO2
The CiO2 (Comms input Output) now features a VU meter showing the signal applied. With a balanced XLR Line-in and a PFL Stereo jack (internally summed) input for sound desks and other monitoring feeds. It is then mixed with your comms headset feed so you can listen to the comms and the feed you are monitoring, without swapping headsets.
Interspace Industries Vertical Balancing Box tower containing 4 x PC Bal Box
SKU: BBT-4M
Tower audio interfacing for control desks and rooms. Using this clever case design we can populate them with what you require for your control environment when you have multiple sources and require to balance them all. Supporting up to four USB/PC BalBox units Please note that these are assembled at the time of purchase, so are not quite ‘off the shelf’, just a day or so usually.
Interspace Industries Vertical Balancing Box tower containing 3 x PC Bal Box + 1 x USB Bal Box
SKU: BBT-3M1U
Tower audio interfacing for control desks and rooms. Using this clever case design we can populate them with what you require for your control environment when you have multiple sources and require to balance them all. Supporting up to four USB/PC BalBox units Please note that these are assembled at the time of purchase, so are not quite ‘off the shelf’, just a day or so usually.
Interspace Industries Vertical Balancing Box tower containing 2 x PC Bal Box + 2 x USB Bal Box
SKU: BBT-2M2U
Tower audio interfacing for control desks and rooms. Using this clever case design we can populate them with what you require for your control environment when you have multiple sources and require to balance them all. Supporting up to four USB/PC BalBox units Please note that these are assembled at the time of purchase, so are not quite ‘off the shelf’, just a day or so usually.
Interspace Industries Vertical Balancing Box tower containing 1 x PC Bal Box + 3 x USB Bal Box
SKU: BBT-1M3U
Tower audio interfacing for control desks and rooms. Using this clever case design we can populate them with what you require for your control environment when you have multiple sources and require to balance them all. Supporting up to four USB/PC BalBox units Please note that these are assembled at the time of purchase, so are not quite ‘off the shelf’, just a day or so usually.
Interspace Industries 4 rack mounted PC Bal Box
SKU: BbR0U4P
BalBox Rack or “BbR” is a new adaptation of our balancing boxes and it allows us to fit any combination of up to four of the hum eliminators into a rack-mountable unit. The creation of the BbR was a direct result of a request from a customer who uses our units regularly and needs a practical solution for multiple units in the same place.
Interspace Industries Vertical Balancing Box tower containing 4 x USB Bal Box
SKU: BBT-4U
Tower audio interfacing for control desks and rooms. Using this clever case design we can populate them with what you require for your control environment when you have multiple sources and require to balance them all. Supporting up to four USB/PC BalBox units Please note that these are assembled at the time of purchase, so are not quite ‘off the shelf’, just a day or so usually.
Interspace Industries 4 Rack mounted USB Bal box
SKU: BbR4U0P
BalBox Rack or “BbR” is a new adaptation of our balancing boxes and it allows us to fit any combination of up to four of the hum eliminators into a rack-mountable unit. The creation of the BbR was a direct result of a request from a customer who uses our units regularly and needs a practical solution for multiple units in the same place.
YAMAHA Digital Controller Hub for DCP panels.
SKU: DCH8
Divides the control line from host devices such as the Yamaha DME7 and MTX/MRX series into up to 8 lines.
infobit HDMI 4K60 over Optical Fiber Transmitter (Tx), with Audio Extracting, 10KM over Single-mode
SKU: iTrans F1000-T
This HDMI Extender can extend HDMI signal up to 33000 feet/10 km (over single-mode fiber cable) .
infobit HDMI 4K60 over Optical Fiber Receiver (Rx), with Audio Extracting, 10KM over Single-mode
SKU: iTrans F1000-R
This HDMI Extender can extend HDMI signal up to 33000 feet/10 km (over single-mode fiber cable) .
YAMAHA Digital Control Panel for MTX Series. 4 Volume & 4 Switches.
SKU: DCP4V4SEU
4 Volume & 4 Switch equipped Wall Mount Control panel for DME7, MTX/MRX Series and MA/PA series.
infobit HDMI 4K60 over Optical Fiber Extenders (Tx and Rx), with Audio Extracting, 10KM over Single-mode
SKU: iTrans F1000
HDMI 4K60 18Gbps Optical Fiber Extender with Audio Extracting
YAMAHA SFP module for SWR series switches
SKU: SFPSWRGSX
SFP module for SWR series switches
YAMAHA Extension for PGM1. Up to 2 units to each PGM1.
SKU: PGX1
The PGX1 is a paging station extension by using with PGM1 paging station microphone that can be used with the MTX5-D or MRX7-D. PGX1 can be networked via a Dante network and PoE (Power over Ethernet). Two PGX1 units can be added for each PGM1 unit, allowing you to specify broadcast regions in detail and to select from numerous messages.
YAMAHA L2 intelligent RJ45 switch with 10 ports
SKU: SWR2310-10G
L2 intelligent RJ45 switch with 10 ports
YAMAHA Slim line array speaker with 8 x 1.5” drivers. White. Single. IP55 version.
SKU: VXL1W-8-WR
Slim line array speaker with 8 x 1.5” drivers
YAMAHA SFP+ module for 10Gbps audio network
SKU: SFPSWRTSR
SFP+ module for 10Gbps audio network
YAMAHA L2 intelligent RJ45 switch with 18 ports
SKU: SWR2310-18GT
L2 intelligent RJ45 switch with 18 ports
YAMAHA SFP module for SWR series switches
SKU: SFPSWRGLX
SFP module for SWR series switches
YAMAHA SFP+ module for 10Gbps audio network
SKU: SFPSWRTLR
SFP+ module for 10Gbps audio network
YAMAHA L2 switch optimized for Dante® audio networks. PoE.
SKU: SWR2311P-10G
Recommended settings for stable operation of a Dante network (such as QoS, EEE, and IGMP Snooping) can be made easily
YAMAHA L2 intelligent RJ45 switch with 28 ports
SKU: SWR2310-28GT
The Yamaha SWR switch lineup, featuring high-performance L2 switches for fixed installations, has been expanded to provide a wider range of models for a wider range of applications.
YAMAHA AFC Image license 32 object/16output (max. 2 licenses = 64 object/32 output)
SKU: DEK-AFC-I
AFC Image allows users to control the perceived positions of sound within a space. AFC Image supports the control of up to 128 object-based channels of immersive sound.
Showing 1-60 of 60 items